Stud Welding & Fasteners, Inc.

  • Home
  • Stud Welding Products
    • About Us – Stud Welding & Fasteners, Inc.
    • Arc Stud Welding Equipment
    • Capacitor Discharge Equipment
      • (Discontinued) Tru-Weld Equipment
    • Capacitor Discharge Accessories
    • Insulation Pin Welders
    • Weld Studs
    • Fasteners
    • Stud Welding Accessories
  • Stud Welding Services
    • About Us – Elrod Stud Welding
    • Job Site Stud Welding
    • Stud Welder Rental
    • Embed Plates
    • Jobsite Photo Gallery
  • Catalog
  • Quote Request
  • Store
  • Contact
  • Blog

Capacitor Discharge Equipment (Discontinued)

To choose the right stud welder for your applications, you first need to decide the maximum stud diameter you will need to shoot. Please call and we will gladly help you determine the best suited stud welder for your application.”

Capacitor Discharge Stud Welding Systems

TWE series capacitor discharge systems have been replaces by the TWi series

TWE-250 Capaciitor Discharge Stud Welder

Model TWE-250 Capacitor Discharge Stud Welder (1/4″ Max Stud Diameter)
TWE series capacitor discharge systems have been replaces by the TWi series

Product Description
The TWE-250 incorporates the latest solid state technology into a compact and rugged capacitor discharge stud welder. This system has the capability to weld studs and pins (including cupped head pins) ranging from 14 gauge through 1/4″ full-flanged stainless steel studs.

Operational and Safety Features

  • LED Voltage Meter
  • Safety Shutdown
  • Cooling Fan
  • Front-Panel Informational LED’s
  • Dial-down weld voltage control

TWE-250 Features

  • Digital DC Voltage read-out on all models (allows for more accurate and repeatable weld settings).
  • Cooling Fan in all models for increased efficiency.
  • Dial-down DC voltage settings (no need to turn off the unit when resetting to a lower voltage).
  • Only 10 amp circuit requirement (unit fused at 10 amps).
  • 66,000 micro farad capacitors charging to 200 VDC for greater power output at lower DC voltage requirements.
  • Terminal connections on capacitors are over 5/8″ in diameter for a good seat of the terminal buss bars to increase reliability.
  • Terminal connections on capacitors have 1/4-20 socket set screws inserted into each one. The socket set screw is used to make the connection to the buss bars. This eliminates damaging the threads in the aluminum connections of the capacitor, assuring a solid contact connection.
  • Rigid internal construction connecting the the entire internal unit to the front and rear panels minimizes the opportunity of the components coming loose during handling or operations.
  • Sheet metal is powder-coated for greater durability, texture, and appearance.
  • CD Stud guns are ergonomically designed for better hand fit and comfort which reduces operator fatigue for increased weld repeatability.
  • CD Stud guns have a permanent internal spring with easy adjustment for various spring pressures for applying the correct spring pressure to the weld.
  • CD Stud guns can be configured for “B” collets, “CI” collets, Euro collets, or standard tapered chucks.
  • The TWE-250 CD Unit weighs less than most other available models for ease of carrying.

TWE-321 Capacitor Discharge Stud Welder

Model TWE-321 Capacitor Discharge Stud Welder (5/16” Max Stud Diameter)
TWE series capacitor discharge systems have been replaces by the TWi series

Product Description
The TWE-321 incorporates the latest solid state technology into a compact and rugged capacitor discharge stud welder. This system has the capability to weld studs and pins (including cupped head pins) ranging from 14 gauge through 5/16″ full-flanged stainless steel studs.

Operational and Safety Features

  • LED Voltage Meter
  • Safety Shutdown
  • Cooling Fan
  • Front-Panel Informational LED’s
  • Dial-down weld voltage control

TWE-321 Features

  • Digital DC Voltage read-out on all models (allows for more accurate and repeatable weld settings).
  • Cooling Fan in all models for increased efficiency.
  • Dial-down DC voltage settings (no need to turn off the unit when resetting to a lower voltage).
  • Only 10 amp circuit requirement (unit fused at 10 amps).
  • 99,000 micro farad capacitors charging to 200 VDC for greater power output at lower DC voltage requirements.
  • Terminal connections on capacitors are over 5/8″ in diameter for a good seat of the terminal buss bars to increase reliability.
  • Terminal connections on capacitors have 1/4-20 socket set screws inserted into each one. The socket set screw is used to make the connection to the buss bars. This eliminates damaging the threads in the aluminum connections of the capacitor, assuring a solid contact connection.
  • Rigid internal construction connecting the the entire internal unit to the front and rear panels minimizes the opportunity of the components coming loose during handling or operations.
  • Sheet metal is powder-coated for greater durability, texture, and appearance.
  • CD Stud guns are ergonomically designed for better hand fit and comfort which reduces operator fatigue for increased weld repeatability.
  • CD Stud guns have a permanent internal spring with easy adjustment for various spring pressures for applying the correct spring pressure to the weld.
  • CD Stud guns can be configured for “B” collets, “CI” collets, Euro collets, or standard tapered chucks.
  • The TWE-321 CD Unit weighs less than most other available models for ease of carrying.

TWE-375 Capacitor Discharge Stud Welder

Model TWE-375 Capacitor Discharge Stud Welder (3/8” Max Stud Diameter)
TWE series capacitor discharge systems have been replaces by the TWi series

Product Description
The TWE-375 incorporates the latest solid state technology into a compact and rugged capacitor discharge stud welder. This system has the capability to weld studs and pins (including cupped head pins) ranging from 14 gauge through 3/8″ full-flanged stainless steel studs.

Operational and Safety Features

  • LED Voltage Meter
  • Safety Shutdown
  • Cooling Fan
  • Front-Panel Informational LED’s
  • Dial-down weld voltage control

TWE-375 Features

  • Digital DC Voltage read-out on all models (allows for more accurate and repeatable weld settings).
  • Cooling Fan in all models for increased efficiency.
  • Dial-down DC voltage settings (no need to turn off the unit when resetting to a lower voltage).
  • Only 10 amp circuit requirement (unit fused at 10 amps).
  • 132,000 micro farad capacitors charging to 200 VDC for greater power output at lower DC voltage requirements.
  • Terminal connections on capacitors are over 5/8″ in diameter for a good seat of the terminal buss bars to increase reliability.
  • Terminal connections on capacitors have 1/4-20 socket set screws inserted into each one. The socket set screw is used to make the connection to the buss bars. This eliminates damaging the threads in the aluminum connections of the capacitor, assuring a solid contact connection.
  • Rigid internal construction connecting the the entire internal unit to the front and rear panels minimizes the opportunity of the components coming loose during handling or operations.
  • Sheet metal is powder-coated for greater durability, texture, and appearance.
  • CD Stud guns are ergonomically designed for better hand fit and comfort which reduces operator fatigue for increased weld repeatability.
  • CD Stud guns have a permanent internal spring with easy adjustment for various spring pressures for applying the correct spring pressure to the weld.
  • CD Stud guns can be configured for “B” collets, “CI” collets, Euro collets, or standard tapered chucks.
  • The TWE-375 CD Unit weighs less than most other available models for ease of carrying.

Model TWP-2 Capacitor Discharge Pin Welder

Model TWP-2 Capacitor Discharge Pin Welder (#10 Max Stud Diameter)
TWE series capacitor discharge systems have been replaces by the TWi series

TWP-2 Product Features

  • Digital DC Voltage readout for accurate weld settings.
  • Cooling fan for increased efficiency.
  • Dial-down DC voltage setting.
  • 15 amp cicuit requirement.
  • Power output at lower DC voltage requirement.
  • Terminal connections on the capacitor are over 5/8″ in diameter for a good seat on the buss bars to increase reliability.
  • The TWP-2 is mounted in a rugged outer case for greater durability, texture, and appearance.
  • The TWP-2 weighs approximately 12.5 pounds for ease of carrying.
  • The TWP-2 has a optional shoulder strap for easy carrying and comfort.

 


TWE-SPC – TRU-WELD Capacitor Discharge Stud Welder Special Package
TWE series capacitor discharge systems have been replaces by the TWi series

Product Description
The TWE-SPC Package incorporates the latest solid state technology of our CD Welders into a compact and rugged mobile capacitor discharge unit. This special packaging is available for all of our Capacitor Discharge Welders – The TWE-250, TWE-321, TWE-375.

Operational and Safety Features

  • LED Voltage Meter
  • Safety Shutdown
  • Cooling Fan
  • Front-Panel Informational LED’s
  • Dial-down weld voltage control
  • Storage space for weld gun and cable
  • Ease of transport due to extension handle and wheels.

 

 

CD Pin Welder Unit
CD Pin Welding System

 

Additional Capacitor Discharge Welding Equipment

HBS SPIRIT (Max – 1/4″)
HBS CD 2301 (Max 5/16” – 3/8” Diameter limited)
HBS CD 3101 (Max – 3/8”)

Share Button
Print Friendly, PDF & Email

Navigation

  • Job Site Stud Welding
  • Stud Welder Rental
  • Arc Stud Welding Equipment
  • Capacitor Discharge Equipment
    • Capacitor Discharge Equipment (Discontinued)
  • Capacitor Discharge Accessories
  • Insulation Pin Welders
  • Stud Welding Accessories
  • Automatic Stud Welding
  • Job Site Project Gallery
  • Weld Studs
  • Fasteners
  • Sign Applications
  • About Stud Welding

Address:

Stud Welding and Fasteners, Inc.
1032 Tennessee Blvd.
Lebanon, TN 37087
(800) 936-1948

Buy Stud Welding Products Online

Buy Stud Welding Products Online

COMPANY INFO.

Stud Welding and Fasteners, Inc.
Corporate Office
1032 Tennessee Blvd.
Lebanon, TN 37087
Phone: (800) 936-1948

Website Management
Steel Erectors Association of America Member
Stud Welding Equipment Rental and Service
Copyright © 2021 Stud Welding & Fasteners, Inc. · All Rights Reserved.