Jobsite Photos:
Union University Library in Jackson, TN
¾ x 3 7/8 Headed Shear Connectors shot Thru-Deck. A very difficult job due to the radius’ this building had. A dome roof was included in the construction, so lots of angles. The deckers did the best they could, but they left a lot of work for us. The deck was welded to the bent plate in many areas which causes there to be a gap between the deck and the beam we need to shoot to. So, it’s hammer time. This is pretty typical of jobs that aren’t perfect squares. This job required roughly 9000 ea ¾ x 3 4/8 HSC’s.
Equipment used: Tru-Weld Equipment 205 KW Generator and TWE SC-3402 Dual Gun Stud Welder with TWE17000 HD Stud Guns and Thru-Deck accessories.
Please see our Arc Stud Welding Equipment Page for detailed specs and information on the equipment used.